Phone Number
0581016267

Address
P.O.BOX 25115 DUBAI UAE

TWO MAN FORKLIFT MAN CAGE-MAN BASKET

TWO MAN FORKLIFT MAN CAGE-MAN BASKET  

BRAND VALINOR MANUFACTURED IN DUBAI.

Lift personnel safely with a forklift

FORKLIFT MAN CAGE-MAN BASKET-Elevate personnel securely with your forklift and a Star Industries Industrial work platform. It’s safer and faster than ladders and less expensive than time-consuming scaffolding.

  • 250-500-750 and 1000 kg capacity
  • OSHA 29 CFR Part 1926.502 Sub part M guard rail and Heavy Duty Construction
  • Secures to forks with simple “Positive Pin Locking System”
  • Front mid rail raises for entrance (no gate to be left open)
  • Built-in 2 meters high Mast Protection Screen (upper half removable for transportation & storage)
  • Integral full perimeter toe board
  • Accepts forks up to 60 mm thick 150 mm wide
  • Safety lanyard anchor points
two man forklift man baskets

FORKLIFT MAN CAGE-MAN BASKET-forklift man baskets

MAN CAGE  SALE AND HIRE UAE CRANE AND FORKLIFT ENABLED, THIRD PARTY CERTIFIED, 1, 2 AND 4 MAN MAN CAGES AND MAN BASKETS AVAILABLE IN ABU DHABI DUBAI SHARJAH RAS AL KHAIMA AL AIN FUJAIRAH.

DURABLE, OSHA COMPLIANT AND AFFORDABLE TWO MAN FORKLIFT MAN CAGE-MAN BASKET  AVAILABLE FOR DUBAI, ABU DHABI, AL AIN,  SHARJAH, FUJAIRAH AND RAS AL KHAIMA.

PREMIUM QUALITY MAN BASKETS MADE IN DUBAI

 

FORKLIFT MAN CAGE-MAN BASKET-PLEASE CONTACT

FACTORY PRICES:

06 743 9209

Cell: 058 101 6267

WhatsApp: 050632 8990

Email:info@bakjam.com

www.bakjam.com

FORKLIFT MAN CAGE-MAN BASKET-forklift man baskets-II

FORKLIFT MAN CAGE-MAN BASKET-forklift man baskets-II

  • Each CUSTOM CAGE platform is load tested
  • Inspection and certification of OSHA compliance included.
  • Sides enclosed with expanded metal to the intermediate rail 21″ above floor
  • Grab rail on entire inside perimeter
  • Floor-nonslip diamond plate with drain holes
  • Access door – Inward swinging, Self-closing, Self-latching, comes with heavy duty latch & hinges.
  • 2″ high strength square tubing design
  • 6″ steel continuous toe plate
  • Guardrail system complies with OSHA 29 CFR Part 1926.502 Sub part M.
  • Anchors for personnel body harness complies with OSHA 29 CFR 1926.502 Sub part M.
  • Exterior pad eyes for anchoring and tag line use
  • Finish: Impact Resistance Electrostatic Powder Coat.
  • Safety warning decals and permanent non-corrosive ID plate
  • Operating manual furnished inside of the man basket in a water proof compartment.(OSHA Required)
      • OSHA stipulates in the Final Rule that a trial lift/proof test is required each time the crane moves to a new location
      • OSHA calls for the platform to be proof tested to 125% of the rated load
    • Forklift attachment with safety restraint
    • Four or five part bridle assembly with shackles
    • Protective Nylon Covers
    • Rubber bumpers (8 places)
    • Expanded metal roof (removable)
    • Solid steel roof (removable)
    • Tool storage shelf
    • Safety Harness and Lanyard
    • Paint colors and finishes
    • Forklift Platforms
    • Round Suspended Personnel Cages
    • Cantilever Suspended Personnel Cages
    • Rescue Platforms
    • Material Cages built to size required for the job – check out the photo tab for pictures of ones we have built.
    • U-Cages
    • Suspended Cages
    • Trolley Cages
    • Job Boxes
    • Dump Boxes / Skip pans

FORKLIFT MAN CAGE-MAN BASKET- Rescue Platforms

Our Standard Features For the Rescue Platform Include:

  • Meets or exceeds A.S.M.E. B30.23-latest specifications.
  • Designed to meet or exceed OSHA 29 CFR Subpart CC Part 1926.1431 final rule.
  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Three year warranty.
  • Dimensions: 48”x96”x44” or 48″x96″x86″
  • Working load limit; 1,000 lbs.
  • Each CUSTOM CAGE is load tested.
  • Inspection and certification of OSHA compliance included.
  • 2” square tubing design.
  • Sides enclosed with expanded metal to the intermediate-rail.
  • Grab rail on entire inside perimeter.
  • Floor – non slip diamond plate.
  • 30″ Access door – Outward swinging drop pin latch on the 44″ high cage (ME-488).
  • Drop down ramp on one end and a inward swinging access gate on opposite side on the 86″ high cage (MRC-488).
  • 6” Steel continuous toe plate.
  • Guardrail system complies with OSHA 29 CFR Part 1926.502 Sub part M.
  • Anchors for personnel body harness complies with OSHA 29 CFR 1926.502 Sub part M.
  • Exterior pad eyes for anchoring and tag line use.
  • Bridle attachment points.
  • Finish – Electrostatic powder coat : Safety Yellow.
  • Safety warning decals and permanent non corrosive ID Plate.
  • Operating manual furnished inside of cage in a water proof compartment.
  • Fully covered by product liability insurance.